Cannot seem to get MS408 flashed properly

Ir abajo

Cannot seem to get MS408 flashed properly

Mensaje  Graeme el Miér Feb 09, 2011 4:49 pm

Hi, I'm a newbie to this forum, but it looks great! So please bear with me...

I bought a MS408 in Australia last week. Despite reading about all the problems, the technician inside me said to still buy one Wink
Anyway, I've been following all the threads on this forum and have flashed my MS408 with MS400_101027_0148.img and also Custom-KV-v104.tar.gz. I also did v105 and v106.
However, I'm pretty sure the flash worked, I was able to verify this in the System Info on the PVR.
And I am able to see the lgmenu on my Windows7 PC, at the IP address of the MS408.

But, I don't think any of the features of the new PipelineManagement is working. For example, I cannot type in any 9xx codes and see any difference. I type in 999 and nothing happens (I actually see the 999 go into the machine like a channel number, but nothing comes back). Same with 907 to check if the Carousel works, but I can't see any difference. So I can't disable the After Recording Power Off, which really annoys me! In addition, it goes to OFF during the night and I have to pull the power cord to restart it again.

After I flashed the device with the USB key in the front, and pressing the Rec button and reset etc. that all works fine. I then power off/on with the power button on the PVR, and wait for the software to install, but it doesn't seem to do anything. I wait 10 minutes, it doesn't reboot.

What am I missing out on? Any help would be greatly appreciated.
Thanks for all you hard work and this forum.
Cheers,
Graeme.

Graeme

Mensajes : 4
Fecha de inscripción : 09/02/2011

Ver perfil de usuario

Volver arriba Ir abajo

Re: Cannot seem to get MS408 flashed properly

Mensaje  vic1972 el Miér Feb 09, 2011 6:49 pm

Hello,
welcome to the forum.

You might be reading old posts ..., 999 was old numeric code, now it is 987.
Anyway numeric codes state machines has been improved, but still have to wait one week aprox to get new version Smile

If you press very quick 986, what does appears in screen?

regards




avatar
vic1972

Mensajes : 2260
Fecha de inscripción : 09/12/2009
Edad : 46
Localización : Malaga

Ver perfil de usuario

Volver arriba Ir abajo

Re: Cannot seem to get MS408 flashed properly

Mensaje  Graeme el Jue Feb 10, 2011 12:30 am

Hi, thanks for the quick response.
When I press 986, or 987, it shows the numbers as I type them in, but they immediately disappear, then just displays the channel number (eg. 009, which is the channel that is on TV at the moment)
It's like I did nothing to the PVR when I type in the 9xx codes.
Graeme.


Última edición por Graeme el Jue Feb 10, 2011 12:33 am, editado 1 vez (Razón : Additional info:)

Graeme

Mensajes : 4
Fecha de inscripción : 09/02/2011

Ver perfil de usuario

Volver arriba Ir abajo

Re: Cannot seem to get MS408 flashed properly

Mensaje  vic1972 el Jue Feb 10, 2011 8:19 pm

OK, can you send me or post here the log file /tmp/PipeManagement.log
thanks
avatar
vic1972

Mensajes : 2260
Fecha de inscripción : 09/12/2009
Edad : 46
Localización : Malaga

Ver perfil de usuario

Volver arriba Ir abajo

Re: Cannot seem to get MS408 flashed properly

Mensaje  Graeme el Vie Feb 11, 2011 1:41 pm

Hi,
There appears to be no such log (/tmp/PipeManagement.log). I hope I am looking in the right place - I did an FTP to the device, and went to the /tmp directory (from the root directory).
Here is a dump of the files and directories in the /tmp directory:

02/11/2011 08:27AM 31 IMS
02/11/2011 08:27AM 23 IMSMETA
02/11/2011 09:09PM 0 appout
02/11/2011 07:41PM 160 command_sender.txt
02/11/2011 08:27AM Directory empty
03/30/2010 12:00AM Directory hdd
02/11/2011 08:27AM 31 hddmedia
02/11/2011 08:27AM 100 hddservice.log
11/18/2009 12:00AM Directory lib
11/18/2009 12:00AM Directory lock
11/18/2009 12:00AM Directory log
02/11/2011 08:27AM Directory net
02/11/2011 08:26AM Directory netb
02/11/2011 08:28AM 0 php.socket-0
02/11/2011 07:33PM Directory ramfs
02/11/2011 08:28AM 0 rtorrentrpc.socket
02/11/2011 08:27AM Directory run
02/11/2011 08:28AM Directory screens
02/11/2011 08:26AM Directory smb
11/18/2009 12:00AM Directory usbmounts
11/18/2009 12:00AM Directory www


It's just not there. Let me know if I'm looking in the wrong place.
Thanks for all your help,
Graeme.

Graeme

Mensajes : 4
Fecha de inscripción : 09/02/2011

Ver perfil de usuario

Volver arriba Ir abajo

Re: Cannot seem to get MS408 flashed properly

Mensaje  vic1972 el Vie Feb 11, 2011 5:22 pm

Hi,
sorry, i0ve just realized that probalby the log is not there becuse we put in production mode, sorry.

ok, so you cannot see the web site in the lg, ... right?
try this
connect using telnet:
Venus login :root
Password: mugung
and delete custom folder with
rm -rf custom

then put in usb stick the file Custom-KV-v105.tar.gz
and then boot lg with the usb stick in; then in 2 minutes aprox it will reboot.

good luck,
if that is not going, you might wait some says, as we are preparing a surprise for next week Wink

avatar
vic1972

Mensajes : 2260
Fecha de inscripción : 09/12/2009
Edad : 46
Localización : Malaga

Ver perfil de usuario

Volver arriba Ir abajo

Re: Cannot seem to get MS408 flashed properly

Mensaje  Graeme el Sáb Feb 12, 2011 2:58 am

Hi,
First, I have been able to access the lgmenu website on my Win7 machine. I could do everything, I think, that I wanted to (check recordings, use remote etc).

Then I did the steps you suggested, and removed the custom directory. Then put Custom-KV-v105.tar.gz onto USB and rebooted PVR.
It doesn't reboot in 2 minutes (actually, it never reboots - and I think that's the problem).
Also, now, since the directory remove, I can't access the lgmenu website.

Here's a question: does the USB key have to be formatted FAT32 for the upgrade? Can it still work with NTFS format?

I think I'll wait for your surprise this week. Maybe it will all work with the new version.
Thanks again for all your help. You're likely to hear from me again... bounce
Cheers, Graeme.

Graeme

Mensajes : 4
Fecha de inscripción : 09/02/2011

Ver perfil de usuario

Volver arriba Ir abajo

Re: Cannot seem to get MS408 flashed properly

Mensaje  jasper56 el Vie Mar 04, 2011 1:40 pm

Hi
if I install MS400_101027_0148.img do I then do Custom-KV-v105.tar.gz or Custom-KV-v104.tar.gz ?

jasper56

Mensajes : 1
Fecha de inscripción : 04/03/2011
Localización : Australia

Ver perfil de usuario

Volver arriba Ir abajo

Re: Cannot seem to get MS408 flashed properly

Mensaje  Contenido patrocinado


Contenido patrocinado


Volver arriba Ir abajo

Volver arriba


 
Permisos de este foro:
No puedes responder a temas en este foro.